Bilt Hamber Autofoam

£18.95

Gentle on paintwork

None caustic formula

Easy rinsing

Description

Bilt Hamber Autofoam Snowfoam Prewash 5 Litres

Key Features:

Pre-wash Snow Foam Shampoo: Ideal for heavy traffic areas.
Biodegradable: Environmentally friendly.
Non-Caustic: Safe for paint.
High Activity Foam: Ensures thorough cleaning.
5000ml Volume: Generous amount for use.

Benefits:

Reduces Damage: Minimizes paintwork damage.
FOD Free: Provides clear, damage-free paint.
Water-Based: Gentle on vehicle paintwork.
Pressure Washer Compatible: Works with all foam lances.
Panel-Dwell Time: Typically five minutes at a PIR of 4%.
Easy Rinsing: Cleans without leaving residue.
Biodegradable Compounds: Tough on soil and grime.
Non-Caustic Formula: Safe for regular use.
Systematic Bubbles: Neutralizes road grime.
Conventional Wash: Leaves a well-presented surface.

Usage:

Excessive Soiling: Increase PIR and/or number of applications.

Conclusion:

Bilt Hamber Autofoam Snowfoam Prewash is a premium, water-based pre-wash treatment designed for thorough cleaning and damage prevention. It is biodegradable, non-caustic, and compatible with all pressure washer foam lances. With a panel-dwell time of typically five minutes, it ensures maximum wetting and easy rinsing, leaving a well-presented automotive surface ready for further treatments.

How to Use

For Snow Foam Lances

Fill the reservoir to its maximum capacity with plain water.
Turn the dilution knob clockwise to its closed setting ('thickest' foam)
Discharge the lance into a bucket, monitoring the reservoir until it is empty.
Once the reservoir is empty, stop.
Now, you'll need a measuring jug.
For a 4% dilution (for very dirty vehicles), measure the amount of water in your bucket and multiply this amount by 0.04. For example, if the total amount of water used is 10,000ml (10L), you would need 400ml of AUTOFOAM.
Refill the reservoir with water and the appropriate amount of AUTOFOAM. Shake for a few moments, and you're ready to go.
You can experiment with different dilution ratios to see the effect AUTOFOAM has on your vehicle.

For trigger and pump sprayers:

Foam generation isn't necessary for AUTOFOAM to work effectively, so you can confidently use it in a non-foaming IK sprayer or similar device.
Simply dilute your sprayer's reservoir capacity by 0.005 up to 0.04. For example, a 1-litre sprayer used on a very dirty vehicle would require 40ml of AUTOFOAM added to its water.
Shake for a few moments, and you're ready to spray.
Allow the solution to soak for 1-5 minutes, but never let AUTOFOAM dry.
Using a pressure washer is recommended to remove as much contamination as possible.

size

5 litres

Quantity

Bilt Hamber Autofoam

You may also like

Bilt Hamber Traceless

Bilt Hamber Touch-on

Bilt Hamber Touch-Less

Bilt Hamber Surfex HD

Your Cart